INADCO Moisture Measurement B.V.
About us
INADCO develops and produces machines and measuring equipment suitable for measuring in processes with fine and coarse inhomogeneous bulk goods, without using numerous calibration lines for each product.
We identify and analyze process automation problems or bottlenecks and provide solutions where possible. With this formula of total solutions INADCO is characterized.
Products & services
INADCO DENSITY METER
The INADCO Densimeter is a bulk density meter that consist of 3 major parts. A measuring module and a motor module. Both attached to a sub-frame. The sampler module is an electronic driven shovel that rotates trough a falling product stream and in that way collecting a small sample of product. The measuring module consist of a cylinder with the same volume as the cylinder used in the manual EN12580 method. The measuring cylinder is mounted on a weighing cell. With adjustable scoop rotation, the sampler takes samples from a vertical product flow. The shovel shall bring the collected sample toward the measuring cylinder where it will be obstructed so it shall fall in the measuring cylinder with zero vertical velocity as a starting speed. The sample taking will be repeated until the measuring cylinder is completely filled. The sample taking will pause and after the calculation of the Bulk Density the shovel shall rotate over the measuring cylinder to open the bottom. All the collected sample will slide out the cylinder back into the main product stream. The shovel shall rotate back closing the bottom and starts again with the sampling. The time consumption of the sampling, calculation and emptying is around 60 seconds resulting in a measurement every 3-5 m³ of product. A much higher rate compared to the manual method.
Inline Moisturemeter for Bulk Solids
De INADCO vochtmeters kenmerken zich door in één keer het vochtgehalte te bepalen over een groot oppervlak met vele centimeters indringdiepte. Doordat wij de sensoren zelf ontwikkelen en produceren zijn wij in staat om de uitvoeringsvorm zo te maken dat deze perfect past in uw specifieke toepassing. Standaard meet de INADCO Vochtsensor in een cilinder met een inhoud van 20 liter waarbij de sensor 75% van het oppervlak van de wand omvat. Voor meer informatie kom naar onze stand of bezoek onze website.
INADCO Moisturemeter II
Based on the principles of the Moisturemeter I, the Moisturemeter II is a new innovation initially developed to be used in the Biomass industry. The Moisturemeter II makes the technology available for a wide range of raw materials used and the more industrial uses of Biomass like power plants. The new Moisturemeter II is one complete apparatus capable of doing all necessary measurements to be able to process low quality feedstock. It is build around a conveyor belt and even has an integrated belt scale. As a result the Moisturemeter II can measure Biomass while it is being fed into the boiler. This in combination with state-of-the-art laser sensor technology for Volume scanning it guarantees instant information such as: • Mass flow • Volume flow • Flow of dry solids • Flow of water • Moisture percentage, • Temperature of the product • Total mass • Bulk density • Real time calorific value of the dry matter (in combination with the fuel value) These parameters are available as actual values and as averages and totals within the batch.
Cross Scanner
The stand alone Cross Scanner is mostly used for measuring the layer thickness of the product on a conveyor belt. An infra red laser line measures at 400 points every 100ms the height of the product over the whole width of the conveyor belt